News

TCN explains real cause of power disruption in some areas

Written by silvernewsng

By Ignatius Chukwu


The Transmission Company of Nigeria (TCN), has clarified reason for the disruption of power in some parts of Nigeria few days ago.
The Corporation also assured that power was restored in those places at about 6:10pm on August 5, 2024.


Ndidi Mbah, the general manager, Public Affairs, power supply was restored to areas that had been affected by the arcing on the Benin-Egbin 330kV isolator, saying it was arcing that caused lines tripping and consequent loss of supply to some areas. “However, contrary to media reports, the incident did not cause a system collapse.
“The lines tripping started earlier at about 2:47p.m. the previous day with a heavy system surge that led to the arcing of Benin-Egbin 330kV line isolator fingers at the Egbin Transmission Substation switchyard.


“This resulted in a tripping at the Egbin Generating Station, which caused the loss of power supply to all the Egbin Transmission Substation’s outgoing lines. This led to an exponential increase inload on the Osogbo lhovbor 330kV line 1with serious arcing of isolator terminals on the Osogbo-lhovbor 330kV line.”


To ensure that the sequence of events did not affect the nation’s grid, she went on, the Osogbo lhovbor 330kV line was opened to temporarily cut off the flow of electricity on that line.


“At about 2:56pm, however, the Benin-Egbin 330kV line 1Circuit Breaker also tripped at the Benin Transmission Substation end and this resulted in the loss of supply to Lagos axis, parts of the South West Region, parts of the North Central and Abuja.”
Meanwhile, other areas, according to the GM, including the South Eastern region, North East, and other parts of North Central and South West, had full power supply.
She said the line tripping was quickly rectified, enabling the grid controller to restore full bulk power supply through the transmission lines at about 6.10pm of August 5, 2024.

About the author

silvernewsng

Leave a Comment